TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 516 of 1396
TM 9-2320-366-20-3 3-10 Change 2 3-4. ENGINE OIL FILTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Strap, Adjustable (Item 57, Appendix C) Container (40 qt (38 L) capacity) Materials/Parts Oil, Lubricating, OE/HDO 15W/40 (Item 44, Appendix D) Filter, Oil (Item 23, Appendix G) Packing, Preformed (Item 203, Appendix G) a. Removal. (1) Position container under oil pan (1). (2) Remove oil pan plug (2) from oil pan (1). (3) Remove preformed packing (3) from oil pan drain plug (2). Discard preformed packing. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Do not remove oil filter while engine is hot. Failure to comply may result in injury to personnel.