TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 45 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2015 2-2015 2-2015 2-2015 2-2015 WHEEL VALVE VENT TEST At high temperatures, air pressure increases in cap chamber of wheel valve, adding to spring pressure so that valve cannot open to allow tire deflation to lower settings. WARNING NOTE (1) Release air from all CTIS wheel valves by backing off vent screws approximately three turns. (2) If CTIS wheel valve fails to release air, replace CTIS wheel valve (para 12-5). (3) Tighten vent screws. Do not overtighten. Do not loosen screw on wheel valve while CTIS is in use. Failure to comply may result in injury to personnel.