TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 407 of 1396

TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2395 2-2395 2-2395 2-2395 2-2395 CONTINUITY TEST CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to bottom post of out solenoid. (3) Connect negative (-) probe of multimeter to winch assembly top terminal lug and note reading on multimeter. (4) If continuity is not present, replace power harness (para 20-60). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to power harness connector pin B. (3) Connect negative (-) probe of multimeter to left top post of in solenoid and note reading on multimeter. (4) If continuity is not present, replace power harness (para 20-60).