TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 406 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2394 2-2394 2-2394 2-2394 2-2394 KNOWN INFO TEST OPTIONS REASON FOR QUESTION Continuity Test or STE/ICE-R #91 YES KNOWN INFO TEST OPTIONS REASON FOR QUESTION Continuity Test or STE/ICE-R #91 NO YES NO If continuity is not present, power harness is faulty. If continuity is not present, power harness is faulty. 12. Is continuity present from bottom post of out solenoid to winch assembly top terminal lug? 13. Is continuity present from power harness connector pin B to left top post of in solenoid? Engine starts. NATO power cable OK. NATO plug OK. Wire 170 OK. Wire 150 OK. Circuit breaker OK. Wire 592 OK. Power cable OK. Out solenoid OK. POSSIBLE PROBLEMS Faulty power harness. Faulty in solenoid. Faulty LMHC winch assembly. Faulty winch cable. Engine starts. NATO power cable OK. NATO plug OK. Wire 170 OK. Wire 150 OK. Circuit breaker OK. Wire 592 OK. Power cable OK. Out solenoid OK. POSSIBLE PROBLEMS Faulty power harness. Faulty in solenoid. Faulty LMHC winch assembly. Faulty winch cable. Replace power harness (para 20-60). Replace power harness (para 20-60). x19. LIGHT MATERIAL HANDLING CRANE (LMHC) DOES NOT OPERATE (CONT) x19. LIGHT MATERIAL HANDLING CRANE (LMHC) DOES NOT OPERATE (CONT) x19. LIGHT MATERIAL HANDLING CRANE (LMHC) DOES NOT OPERATE (CONT) x19. LIGHT MATERIAL HANDLING CRANE (LMHC) DOES NOT OPERATE (CONT) x19. LIGHT MATERIAL HANDLING CRANE (LMHC) DOES NOT OPERATE (CONT)