TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 393 of 1396

TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2381 2-2381 2-2381 2-2381 2-2381 CONTINUITY TEST CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J31-9. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3028 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (1) Remove screw and terminal lug TL178 from audible alarm. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector J31-17. (4) Connect negative (-) probe of multimeter to terminal lug TL178 and note reading on multimeter. (5) If continuity is not present, repair wire 32 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (6) If continuity is present, replace audible alarm (para 7-43). (7) Install terminal lug TL178 on audible alarm with screw. (8) Connect connector P31 to connector J31. (9) Install instrument panel assembly (para 7-15).