TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 356 of 1396
INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-2) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Tools/Special Tools Multimeter, Digital (Item 22, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Personnel Required (2) 1. WARNING Read WARNING on following page. TEST OPTIONS Voltage Test or STE/ICE-R Test #89 YES NO x2. NO POWER TO MOBILE TRACKING SYSTEM (MTS) SENSE TEST OPTIONS 2-2282 Change 2 REASON FOR QUESTION Go to step 2 of this fault. START POSSIBLE PROBLEMS Faulty circuit breaker CB1. Faulty power cable from terminal lug TL15 to terminal lug TL22. Faulty Power Distribution Panel (PD2). Faulty Mobile Tracking System (MTS) Sense. Circuit breaker CB1 is not tripped. Contact supervisor, Mobile Tracking System (MTS) Sense troubleshooting needs to be performed. TM 9-2320-366-20-3 If 24 VDC is not present, go to step 2 of this fault. If 24 VDC is present perform Mobile Tracking System (MTS) Sense troubleshooting. Is 24 VDC present at terminal lug TL6?