TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 343 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 WARNING Drop hydraulic pressure to zero before disconnecting any hydraulic line. Failure to comply may result in injury to personnel. Wear approved eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Fuel and oil are slippery and can cause falls. Wipe up spilled fuel or oil with rags. Failure to comply may result in injury to personnel. (1) Place drain pan under vehicle. (2) Remove four screws, lockwashers and washers from middle control panel cover. Discard lockwashers. (3) Remove two screws, washers, lockwashers, nuts and middle control panel cover from control panel. Discard lockwashers. (4) Check hydraulic hoses, tubes and fittings from linear directional valve to slave and external output ports. (5) Position middle control panel cover on control panel with two screws, washers and nuts. (6) Install four washers, lockwashers, and screws in middle control panel cover. 2-2269/(2-2270 Blank) 2-2269/(2-2270 Blank) 2-2269/(2-2270 Blank) 2-2269/(2-2270 Blank) 2-2269/(2-2270 Blank)