TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 335 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2263 2-2263 2-2263 2-2263 2-2263 REMOTE CONTROL TEST (10) Position PTO switch to off (TM 9-2320-366-10-1). (11) Shut down engine (TM 9-2320-366-10-1). (12) Disconnect remote control unit and stow. (1) Connect remote control unit to RH remote control connector (J2) at rear of wrecker (TM 9-2320-366-10-1). (2) Start engine (TM 9-2320-366-10-1). (3) Position PTO switch to on (TM 9-2320-366-10-1). (4) Position STATION SELECTOR switch to REMOTE CONTROL (TM 9-2320-366-10-1). (5) Check if folding cylinder operates (UP or DOWN) at REMOTE CONTROL panel (TM 9-2320-366-10-1). (6) Position STATION SELECTOR switch to WRECKER CONTROL panel (TM 9-2320-366-10-1). (7) Check if folding cylinder operates (UP or DOWN) from wrecker control panel. (8) If folding cylinder does not operate from remote or wrecker control panels, notify DS Maintenance. (9) If folding cylinder operates from wrecker control panel but not from remote, perform Electrical System Troubleshooting (e137. All Wrecker Functions Do Not Operate From Wrecker Remote Control).