TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 333 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2261 2-2261 2-2261 2-2261 2-2261 UNDERLIFT OPERATIONAL CHECK (11) Shut down engine (TM 9-2320-366-10-1). (12) Remove and stow remote control. (1) Connect remote control unit to RH remote control hook-up (J2) at rear of vehicle. (2) Start engine (TM 9-2320-366-10-1). (3) Position PTO switch to on (TM 9-2320-366-10-1). (4) Position STATION SELECTOR switch to REMOTE CONTROL. (5) Check if underlift operates at remote control (TM 9-2320-366-10-1). (6) Position STATION SELECTOR switch to WRECKER CONTROL panel. (7) Check if underlift operates UP or DOWN from wrecker control panel (TM 9-2320-366-10-1). (8) If underlift does not operate from remote or wrecker control panel, notify DS Maintenance. (9) If underlift operates from wrecker control panel but not remote, perform Electrical System Troubleshooting (e137. All Wrecker Functions Do Not Operate From Wrecker Remote Control). (10) Position PTO switch to off (TM 9-2320-366-10-1).