TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 331 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2259 2-2259 2-2259 2-2259 2-2259 STINGER OPERATIONAL CHECK (11) Shut down engine (TM 9-2320-366-10-1). (12) Remove and stow remote control unit and cable. (1) Connect remote control unit to RH remote control hook-up (J2) at rear of vehicle. (2) Start engine (TM 9-2320-366-10-1). (3) Position PTO switch to on (TM 9-2320-366-10-1). (4) Position STATION SELECTOR switch to REMOTE CONTROL. (5) Check if stinger operates at remote control (TM 9-2320-366-10-1). (6) Position STATION SELECTOR switch to WRECKER CONTROL panel. (7) Check if stinger operates IN or OUT from wrecker control panel (TM 9-2320-366-10-1). (8) If stinger does not operate from remote or wrecker control panel, notify DS Maintenance. (9) If stinger operates from wrecker control panel but not remote, perform Electrical System Troubleshooting (e138. All Wrecker Functions Do Not Operate From Wrecker Control Panel). (10) Position PTO switch to off (TM 9-2320-366-10-1).