TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 319 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 2-2249 2-2249 2-2249 2-2249 2-2249 WARNING Wear approved eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Fuel and oil are slippery and can cause falls. Wipe up spilled fuel or oil with rags. Failure to comply may result in injury to personnel. (1) Place drain pan under vehicle. (2) Remove four screws, lockwashers, and washers from middle control panel cover. Discard lockwashers. (3) Remove two screws, washers, lockwashers, nuts and middle control panel cover from control panel. Discard lockwashers. (4) Check hydraulic hoses, tubes and fittings for leakage and damage from upper main control valve to stiffleg cylinders. (5) Position middle control panel cover on control panel with two screws, washers, lockwashers and nuts. (6) Install four washers, lockwashers and screws in middle control panel cover. Drop hydraulic pressure to zero before disconnecting any hydraulic hoes, tubes, and fittings. Failure to comply may result in injury to personnel.