TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 307 of 1396
WARNING Wear approved eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. (1) Start engine (TM 9-2320-366-10-1). (2) Position PTO switch to on (TM 9-2320-366-10-1). Keep tachometer within 1,250-1,450 RPM when PTO is engaged. Failure to comply may result in damage to equipment. In the event of a tachometer failure, a HAND THROTTLE lever positioned to L is approximately 1,250-1,450 RPM. (3) Set engine speed to 1250-1450 RPM (TM 9-2320-366-10-1). (4) Toggle DUMP UP/DOWN switch to UP position momentarily (TM 9-2320-366-10-1). (5) Check hydraulic hoses and fittings for Class III leaks. In the event of a tachometer failure, a HAND THROTTLE lever positioned to L is approximately 1,250-1,450 RPM. (6) Set engine speed to 750 RPM (TM 9-2320-366-10-1). (7) Position PTO switch to off (TM 9-2320-366-10-1). (8) Shut down engine (TM 9-2320-366-10-1). CAUTION NOTE NOTE TM 9-2320-366-20-3 Change 2 2-2240.3 (9) If Class III leaks are present, replace leaking hydraulic hose or fitting (para 19-15).