Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 181 of 1396

TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 STEERING GEAR TEST NOTE An alignment mark shall be made on yoke and steering gear assembly shaft prior to disassembly to ensure proper alignment during installation. (1) Remove bolt and locknut from lower yoke of steering gear arm. Discard locknut. (2) Remove yoke from top steering gear assembly shaft. (3) Remove drag link (para 13-3). (4) Turn pitman arm to check for binding and proper output. Notify DS Maintenance if steering gear assembly fails to turn smoothly or if it binds when top shaft is turned. (5) Install drag link (para 13-3). (6) Position yoke on steering gear assembly. (7) Install bolt and locknut into yoke to top steering gear assembly shaft. (8) Lower cab (TM 9-2320-366-10-1). 2-2171/(2-2172 Blank) 2-2171/(2-2172 Blank) 2-2171/(2-2172 Blank) 2-2171/(2-2172 Blank) 2-2171/(2-2172 Blank)