TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 141 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Position master power switch to on (TM 9-2320-366-10-1). (2) Connect positive (+) probe of multimeter to connector P110E. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 vdc is not present, CTIS wiring harness is faulty. (5) If 24 vdc is present, replace CTIS ECU (para 12-6). (6) Position master power switch to off (TM 9-2320-366-10-1). (7) Connect connector P110 to CTIS ECU. 2-2131 2-2131 2-2131 2-2131 2-2131