TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 135 of 1396
TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 TM 9-2320-366-20-3 CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P110 from CTIS ECU. (3) Disconnect connector P111 from connector J111. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to connector P110U. (6) Connect negative (-) probe of multimeter to connector P111B and note reading on multimeter. (7) If continuity is not present, repair wire 1528 (para 2-45) or replace CTIS cable assembly (para 7-60). 2-2125 2-2125 2-2125 2-2125 2-2125