TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 1111 of 1396

TM 9-2320-366-20-3 7-78. CAB TO CHASSIS GROUND STRAP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Tools and Special Tools (Cont) Socket Set, Socket Wrench, (Item 35, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (Item 167, Appendix G) Lockwasher (Item 75, Appendix G) a. Removal. NOTE Remove plastic cable ties as required. (1) Remove two screws (1) and washers (2) from front grille (3). (2) Remove screw (4) and washer (5) from front grille (3). (3) Remove front grille (3) from cab (6). (4) Loosen screw (7) in chassis (8) and remove cab to chassis ground cable (9). (5) Remove self-locking nut (10), washer (11), cab to chassis ground cable (9), and lockwasher (12) from stud (13). Discard self-locking nut and lockwasher. Change 1 7-355