TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1108 of 1396
TM 9-2320-366-20-3 7-77. BATTERY TO STARTER CABLE ASSEMBLY REPLACEMENT (CONT) NOTE • Both clamps are removed the same way. One shown. • Remove plastic cable ties as required. (2) Remove self-locking nut (5), screw (6), battery to starter cable assembly (7), and clamp (8) from frame rail (9). Discard self-locking nut. NOTE Step (3) requires the aid of an assistant. (3) Perform step (2) on remaining clamp. (4) Remove two clamps (8) from battery to starter cable assembly (7). (5) Remove adhesive, nut (10), and terminal lug TL12 (11) from starter solenoid (12). 7-352 Change 1