TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1107 of 1396
TM 9-2320-366-20-3 7-77. BATTERY TO STARTER CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Adhesive (Item 8, Appendix D) Nut, Self-Locking (2) (Item 150, Appendix G) Personnel Required (2) a. Removal. WARNING Remove rings, bracelets, watches, neck- laces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. Batteries can explode from a spark. Battery acid is harmful to skin and eyes. Always wear eye protection when working with batteries. Failure to comply may result in injury to personnel. NOTE • Note routing of battery to starter cable assembly prior to removal. • Tag wires and connection points prior to disconnecting. (1) Remove nut (1) and terminal lugs TL39 (2) and TL10 (3) from battery 24 vdc cable (4). 7-351