TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 1060 of 1396

TM 9-2320-366-20-3 7-62. M1093/M1094 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE ASSEMBLY REPLACEMENT (CONT) (7) Disconnect connector P3 (13) from connector J3 (14). (8) Remove two screws (15), washers (16), clamps (17), and M1093/M1094 cab clearance and marker lights lower cable assembly (18) from cab (19). (9) Remove two clamps (17) from M1093/M1094 cab clearance and marker lights lower cable assembly (18). b. Installation. (1) Install two clamps (1) on M1093/M1094 cab clearance and marker lights lower cable assembly (2). (2) Position M1093/M1094 cab clearance and marker lights lower cable assembly (2) in cab (3) with two clamps (1), washers (4), and screws (5). (3) Tighten two screws (5) to 29-35 lb-in. (3-4 N·m). (4) Connect connector P3 (6) to connector J3 (7). (5) Connect terminal lug TL86 (8) to terminal board TB2 (9) position 4. (6) Connect terminal lug TL74 (10) to terminal board TB1 (11) position 3. (7) Install cover (12) on terminal board TB1 (11) with two washers (13), lockwashers (14), and nuts (15). 7-304