TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1050 of 1396
TM 9-2320-366-20-3 7-60. CENTRAL TIRE INFLATION SYSTEM (CTIS) CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Kick panel removed (para 16-3). Personnel heater removed (para 18-9). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) a. Removal. NOTE • Note routing of CTIS cable assembly prior to removal. • Remove plastic cable ties as required. (1) Disconnect connector P111 (1) from connector J111 (2). (2) Disconnect connector P112 (3) from manifold valve assembly (4). (3) Disconnect connector P113 (5) from pressure transducer (6). (4) Remove CTIS cable assembly (7) from vehicle. b. Installation. NOTE Install plastic cable ties as required. (1) Position CTIS cable assembly (7) in vehicle. (2) Connect connector P113 (5) to pressure transducer (6). (3) Connect connector P112 (3) to manifold valve assembly (4). (4) Connect connector P111 (1) to connector J111 (2). 7-294