TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download

Page 1039 of 1396

TM 9-2320-366-20-3 (11) Remove two nuts (30), screws (31), reinforcing plate (32), and RH bracket (33) from battery box (5). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (12) Remove four rivets (34), washers (35), strip (36), and two plates (37) from battery box (5). (13) Remove adhesive tape (38) from strip (36). b. Installation. (1) Cut adhesive tape (1) to 18 1/4 in. (465 mm). (2) Install adhesive tape (1) on strip (2). (3) Install two plates (3) and strips (2) on battery box (4) with four screws (6), washers (5) and nuts (6.1). Change 1 7-285