TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1016 of 1396
TM 9-2320-366-20-3 7-51. M1084/M1086 JACK CYLINDER PROXIMITY SENSOR REPLACEMENT (CONT) b. Installation. (1) Position nut (1) approximately 1 1/4 - 1 3/8 in. (3.2 - 3.5 cm) from bottom of proximity sensor (2). (2) Position proximity sensor (2) in mounting bracket (3) with nut (4). (3) Adjust proximity sensor (2) until gap between fitting (5) and proximity sensor is 3/16 in. (0.5 cm). (4) Tighten nuts (1 and 4). NOTE Install plastic cable ties as required. (5) Connect proximity sensor connector (6) to connector (7). 7-262