TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1008 of 1396
TM 9-2320-366-20-3 7-48. OIL PRESSURE SWITCH REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Antiseize Compound (Item 58, Appendix D) a. Removal. (1) Disconnect connector clamp (1) from connector J34 (2). (2) Disconnect connector P34 (3) from connector J34 (2). (3) Remove oil pressure switch (4) from fitting (5). b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of oil pressure switch (4). (2) Install oil pressure switch (4) in fitting (5). (3) Connect connector P34 (3) to connector J34 (2). (4) Connect connector clamp (1) on connector J34 (2). 7-254 Change 1