TM-9-2320-366-20-3 MTV Unit Maintenance Manual M1083 Series - Volume 3 Download
Page 1003 of 1396
TM 9-2320-366-20-3 b. Installation. (1) Turn engine speed sensor (5) to the right in fly wheel housing (6) until engine speed sensor contacts fly wheel. (2) Turn engine speed sensor (5) to the left out of fly wheel housing (6) two full turns. (3) Tighten jam nut (4) on engine speed sensor (5). (4) Connect engine speed sensor connector (2) to connector P38 (3). (5) Connect connector clamp (1) on engine speed sensor connector (2). c. Adjustment. (1) Lower cab (TM 9-2320-366-10-1). (2) Connect batteries (para 7-57). NOTE Perform step (3) on vehicles not equipped with tachometer. (3) Connect STE/ICE-R to DCA connector (1). (4) Start engine (TM 9-2320-366-10-1). NOTE Perform step (5) on vehicles equipped with tachometer. If engine speed is not obtained in steps (5) or (6), perform steps (7) through (13). (5) Depress accelerator pedal and check tachometer operation (TM 9-2320-366-10-1). NOTE Perform step (3) on vehicles not equipped with tachometer. (6) Perform STE/ICE-R test 10 and verify engine speed (TM 9-4910-571-12&P). 7-249