TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 999 of 1632
(1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J119j. (3) Connect negative (-) probe of multimeter to connector P114-12 and note reading on multimeter. (4) Connect negative (-) probe of multimeter to all other sockets in connector P114, one at a time, and note reading on multimeter. (5) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (6) If continuity is not present in step 3, or continuity is present in step 4 or 5, replace WTEC III cab transmission harness (para 7-138). CONTINUITY TEST Change 1 2-1755 TM 9-2320-366-20-2