TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 989 of 1632
(1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J119h. (3) Connect negative (-) probe of multimeter to connector P114-13 and note reading on multimeter. (4) If continuity is not present, replace WTEC III cab transmission harness (para 7-138). (5) Connect connector P119 to connector J119. (6) Position front grille on cab with washer and screw. (7) Position two washers and screws in front grille. (8) Tighten screw to 48-60 lb-in. (5-7 N·m). (9) Tighten two screws to 24 lb-in. (3 N·m). CONTINUITY TEST Change 1 2-1745 TM 9-2320-366-20-2