TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 986 of 1632
INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). References TM 9-4910-571-12&P Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) STE/ICE-R (Item 41, Appendix C) KNOWN INFO Fuse OK. Batteries OK. POSSIBLE PROBLEMS Faulty WTEC III cab transmission harness. Faulty WTEC III transmission ECU. TEST OPTIONS REASON FOR QUESTION If continuity is not present from connector J119j to connector P114-12, or continuity is present from J119j to any other P114 sockets or ground, WTEC III cab transmission harness is faulty. Continuity Test or STE/ICE-R Test #91 1. Is continuity present from connector J119j to connector P114-12 and absent from J119j to all other P114 sockets and ground? START CAUTION Read CAUTION on following page. Replace WTEC III cab transmission harness (para 7-138). YES NO TM 9-2320-366-20-2 2-1742 Change 1 f26. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 32 AND ANY SUB CODE