TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 909 of 1632
Change 1 2-1706.7 (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector PX33 socket K1. (3) Connect negative (-) probe of multimeter to a known good ground and note reading on multimeter. (4) If continuity is not present, repair wire 3101 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10). CONTINUITY TEST TM 9-2320-366-20-2