TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 814 of 1632
f6. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND ANY SUBCODE INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). References TM 9-4910-571-12&P Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) STE/ICE-R (Item 41, Appendix C) KNOWN INFO Fuse OK. Batteries OK. POSSIBLE PROBLEMS Faulty WTEC II cab transmission harness. Faulty WTEC II TEPSS. START Is continuity present from connector J119h and J119j to connector J115-27 and J115-28? 1. CAUTION Read CAUTION on following page. TEST OPTIONS REASON FOR QUESTION If continuity is not present from connector J119j to connector J115-27, or continuity is present from J119j to any other J115 sockets or ground, WTEC II cab transmission harness is faulty. Replace WTEC II cab transmission harness (para 7-137). YES NO Continuity Test or STE/ICE-R Test #91 TM 9-2320-366-20-2 2-1620 Change 1