TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download

Page 786 of 1632

f3. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 22 SUB CODE 15 KNOWN INFO REASON FOR QUESTION TEST OPTIONS 1. CAUTION Read CAUTION on following page. START Is continuity present from connector J119 socket p to connector J115 socket 15? Continuity Test or STE/ICE-R Test #91 If continuity is not present, or short circuits are found, WTEC II cab transmission harness is faulty. POSSIBLE PROBLEMS Transmission oil level OK. Fuse OK. Batteries OK. Faulty WTEC II cab transmission harness. Faulty WTEC II TEPSS. NO YES Replace WTEC II cab transmission harness (para 7-137). INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Multimeter, Digital (Item 22, Appendix C) TM 9-2320-366-20-2 2-1594 Change 1 Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench Set, Socket (Item 51, Appendix C) STE/ICE-R (Item 41, Appendix C) References TM 9-4910-571-12&P