TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 77 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-963 2-963 2-963 2-963 2-963 CONTINUITY TEST CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P112 from manifold valve assembly. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P110-B. (5) Connect negative (-) probe of multimeter to connector P112-F and note reading on multimeter. (6) If continuity is not present, replace CTIS cable assembly (para 7-60). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector P110-F. (3) Connect negative (-) probe of multimeter to connector P112-A and note reading on multimeter. (4) If continuity is not present, replace CTIS cable assembly (para 7-60).