TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 769 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect connector P136 (RH worklight) or P135 (LH worklight). (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector P136-B (RH) or P135-B (LH). (4) Connect negative (-) probe of multimeter to ground. (5) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (6) If 12 vdc is not present, repair wire 2004 (para 2-45) or replace crane power cable assembly (para 7-79). (7) Position master power switch to off (TM 9-2320-366-10-1). 2-1577 2-1577 2-1577 2-1577 2-1577