TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 761 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1569 2-1569 2-1569 2-1569 2-1569 CONTINUITY TEST (1) Set multimeter to ohms. (2) Position blackout override switch to on. (3) Connect positive (+) probe of multimeter to blackout override switch pin 5. (4) Connect negative (-) probe of multimeter to blackout override switch pin 1and note reading on multimeter. (5) If continuity is not present, replace blackout override switch (para 7-18). (6) If continuity is present, go to step 4 of this fault. (7) Position blackout override switch to off.