TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 751 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1559 2-1559 2-1559 2-1559 2-1559 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect LH tractor or wrecker worklight from connector P133 or connector P133A. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector P133-B or connector P133A-2. (4) Connect negative (-) probe of multimeter to ground. (5) Position main light switch to STOP/PARK (TM 9-2320-366-10-1). (6) Position work light switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 12 vdc is not present, repair wire 2002 (para 2-45) or replace rear lights cable assembly (para 7-104). (8) Position work light switch to off (TM 9-2320-366-10-1). (9) Position main light switch to OFF (TM 9-2320-366-10-1).