TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 735 of 1632
TM 9-2320-366-20-2 Change 1 2-1543 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to worklights switch terminal 1. (3) Connect negative (-) probe of multimeter to worklights switch terminal 5. (4) Position worklights switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (5) If continuity is not present, replace worklights switch (para 7-18). (6) Connect connector P905 to worklights switch. (7) Position auxiliary panel on auxiliary panel housing with six screws. (8) Tighten six screws to 24 lb-in. (3 N·m).