TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 721 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1529 2-1529 2-1529 2-1529 2-1529 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect connector clamp from connector J209. (2) Disconnect connector P209A or P209B from connector J209. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to connector P209A or P209B pin 1. (5) Connect negative (-) probe of multimeter to ground. (6) Start engine (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 24 vdc is not present, repair wire 1811 (para 2-45) or replace PTO cable assembly (para 7-127). (8) Shut down engine (TM 9-2320-366-10-1).