Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download

Page 717 of 1632

TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1525 2-1525 2-1525 2-1525 2-1525 CONTINUITY TEST (1) Remove personnel heater to gain access (para 18-9). (2) Disconnect connector P912A from connector J912. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to relay K15 socket 87A. (5) Connect negative (-) probe of multimeter to connector P912A-15 and note reading on multimeter. (6) If continuity is not present, repair wire 1811 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (7) If continuity is present, repair wire 1811 (para 2-45) or replace oil cooler fan cable assembly (para 7-136). (8) Install relay K15 in PDP. (9) Connect connector P912A to connector J912. (10) Install personnel heater (para 18-9).