TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 709 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1517 2-1517 2-1517 2-1517 2-1517 CONTINUITY TEST (1) Disconnect connector P210 from connector J210. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector J912-15. (4) Connect negative (-) probe of multimeter to connector J210-1 and note reading on multimeter. (5) If continuity is not present, repair wire 1811 (para 2-45) or replace auxiliary panel cable assembly (para 7-58). (6) Connect connector P210 to connector J210. (7) Connect connector P912 to connector J912. (8) Install personnel heater (para 18-9).