TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 699 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1507 2-1507 2-1507 2-1507 2-1507 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to PDP, where relay K15 terminal 85 was removed. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3012 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (5) If continuity is present, replace relay K15 (para 7-9). (6) Install relay K15 in PDP. (7) Install PDP cover (para 16-2).