TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 697 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1505 2-1505 2-1505 2-1505 2-1505 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Remove PDP cover (para 16-2). (2) Remove relay K15 from PDP. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to PDP, where relay K15 terminal 86 was removed. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-366-10-1). (7) Position radiator fan off switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (8) If 24 vdc is not present, repair wire 1806 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (9) Position master power switch to off (TM 9-2320-366-10-1). (10) Position radiator fan off switch to off (TM 9-2320-366-10-1).