TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 690 of 1632
KNOWN INFO TEST OPTIONS REASON FOR QUESTION NO 8. CAUTION Read CAUTION on following page. YES Continuity Test or STE/ICE-R Test #91 Repair wire 2044 from connector P172 socket G to connector P108 socket 7 (para 2-45) or replace M1090/M1094 dump power cable assembly (para 7-125). Repair wire 2044 from connector J172 pin G to connector L9 socket 1 (para 2-45) or replace M1090/M1094 dump cable assembly (para 7-124). e144. M1090/M1094 DUMP BODY DOES NOT LOWER (CONT) Hydraulic oil level OK. PTO OK. Circuit breaker CB50 OK. Dashboard cable assembly OK. DUMP BED UP/DOWN switch OK. Auxiliary panel cable assembly OK. POSSIBLE PROBLEMS TM 9-2320-366-20-2 2-1502.2 Change 2 Faulty M1090/M1094 dump cable assembly. Faulty M1090/M1094 dump power cable assembly. Is continuity present from connector P172 socket G to connector P108 socket 7? If continuity is not present, wire 2044 in dump power cable assembly is faulty. If continuity is present, wire 2044 in dump cable assembly is faulty.