TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 69 of 1632
CONTINUITY TEST TM 9-2320-366-20-2 Change 2 2-958.17 (1) Connect connector P110 to CTIS ECU. (2) Remove instrument panel assembly for access (para 7-15). (3) Disconnect connector J43 from connector P43. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to connector J43 socket 2. (6) Connect negative (-) probe of multimeter to connector J111 socket F and note reading on multimeter. (7) If continuity is not present, repair wire 1790 from connector J43 socket 2 to connector J111 socket F (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (8) If continuity is present, repair wire 1790 from connector P43 pin 2 to connector P84 socket B (para 2-45) or replace start and charging cable assembly (para 7-132). (9) Connect connector P43 to connector J43. (10) Install instrument panel assembly (para 7-15). (11) Connect connector J111 to connector P111. (12) Install kick panel (para 16-3).