TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 680 of 1632
KNOWN INFO 2. TEST OPTIONS REASON FOR QUESTION CAUTION Read CAUTION on following page. YES 3. KNOWN INFO TEST OPTIONS REASON FOR QUESTION NO Go to step 4 of this fault. CAUTION Read CAUTION on following page. Continuity Test or STE/ICE-R Test #91 Continuity Test or STE/ICE-R Test #91 This question eliminates possible problems and determines where troubleshooting continues. e144. M1090/M1094 DUMP BODY DOES NOT LOWER (CONT) NO Replace solenoid valve (para 7-142). YES Notify DS Maintenance to perform Dump Body Hydraulic System troubleshooting task k2. Dump Body Does Not Lower. TM 9-2320-366-20-2 Hydraulic oil level OK. PTO OK. Circuit breaker CB50 OK. DUMP BED UP/DOWN switch OK. Dashboard cable assembly OK. Auxiliary panel cable assembly OK. POSSIBLE PROBLEMS POSSIBLE PROBLEMS Hydraulic oil level OK. PTO OK. Circuit breaker CB50 OK. DUMP BED UP/DOWN switch OK. Dashboard cable assembly OK. Auxiliary panel cable assembly OK. M1090/M1094 dump cable assembly OK. M1090/M1094 dump power cable assembly OK. If continuity is present, dump body hydraulic system is faulty. Is continuity present from terminal 1 to terminal 2 on down solenoid? Is continuity present from connector L9 socket 2 to a known good ground? 2-1494 Change 2 Faulty dump body hydraulic system. Faulty solenoid valve. Faulty M1090/M1094 dump cable assembly. Faulty M1090/M1094 dump power cable assembly. Faulty dump body hydraulic system. Faulty solenoid valve.