TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 672 of 1632
KNOWN INFO TEST OPTIONS NO 8. CAUTION Read CAUTION on following page. Continuity Test or STE/ICE-R Test #91 YES REASON FOR QUESTION e143. M1090/M1094 DUMP BODY DOES NOT RAISE (CONT) Repair wire 2043 from connector P172 socket F to connector P108 socket 6 (para 2-45) or replace M1090/M1094 dump power cable assembly (para 7-125). Repair wire 2043 from connector J172 pin F to connector L8 socket 1 (para 2-45) or replace M1090/M1094 dump cable assembly (para 7-124). 2-1490.2 Change 2 TM 9-2320-366-20-2 POSSIBLE PROBLEMS Faulty M1090/M1094 dump cable assembly. Faulty M1090/M1094 dump power cable assembly. Hydraulic oil level OK. PTO OK. Circuit breaker CB50 OK. Dashboard cable assembly OK. DUMP BED UP/DOWN switch OK. Auxiliary panel cable assembly OK. Is continuity present from connector P172 socket F to connector P108 socket 6? If continuity is not present, wire 2043 in dump power cable assembly is faulty, If continuity is present, wire 2043 in dump cable assembly is faulty.