TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 653 of 1632
(1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to terminal 1 of tailgate release switch. (3) Connect negative (-) probe of multimeter to terminal 3 of tailgate release switch. (4) Push and hold tailgate release switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (5) If continuity is not present, replace tailgate release switch (para 7-18). CONTINUITY TEST Use care when testing electrical connectors. Do not damage connector pins or sockets with multimeter probes. Failure to comply may result in damage to equipment. CAUTION TM 9-2320-366-20-2 Change 1 2-1475