TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 646 of 1632
1. TEST OPTIONS REASON FOR QUESTION START WARNING CAUTION Read WARNING and CAUTION on following page. NO Voltage Test or STE/ICE-R Test #89 YES This question eliminates possible problems and determines where troubleshooting continues. Is 24 VDC present at connector L7 socket 1? KNOWN INFO POSSIBLE PROBLEMS Faulty tailgate release solenoid. Faulty tailgate release switch. Faulty auxiliary panel cable assembly. Faulty dump power cable assembly. Faulty dump cable assembly. Dump bed raises and lowers. Pneumatics system OK. Materials/Parts Wire, Elec, 50ft (Item 71, Appendix D) Personnel Required (2) References TM 9-4910-571-12&P INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) e142. M1090/M1094 TAILGATE RELEASE DOES NOT OPERATE Go to step 3 of this fault. TM 9-2320-366-20-2 2-1468 Change 1