TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 644 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1466 2-1466 2-1466 2-1466 2-1466 NO YES KNOWN INFO TEST OPTIONS Circuit breaker CB50 OK. Mode selector switch in NORMAL position. Hydraulic functions OK. Station selector switch in remote control position. All functions from wrecker control panel OK. Actuator solenoids OK. Wrecker remote control box OK. POSSIBLE PROBLEMS Faulty remote control wiring harness. 5. Is continuity present between TB and connector J1 and/or J2? Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION If continuity is not present, wire is faulty. Repair wire (para 2-45) or replace M1089 remote control wiring harness (para 7-117). Perform Wrecker Pneumatic Troubleshooting (aa1. One Wrecker Function Does Not Operate From Wrecker Remote Control). e141. ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT) e141. ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT) e141. ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT) e141. ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT) e141. ONE WRECKER FUNCTION DOES NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)