TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 633 of 1632
TM 9-2320-366-20-2 CONTINUITY TEST Change 1 2-1456.21 (1) Remove circuit breaker CB50 from PDP. (2) Remove electrical tape from conductor splice at pneumatic solenoid L19. (3) Cut wire 19 from conductor splice at pneumatic solenoid L19. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to terminal block TB19. (6) Connect negative (-) probe of multimeter to wire 19 and note reading on multimeter. (7) If continuity is not present, replace M1089 winch control wiring harness (para 7-142).