TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 563 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1439 2-1439 2-1439 2-1439 2-1439 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Set multimeter to vdc. (2) Connect positive (+) probe of multimeter to wrecker control panel terminal board position 7. (3) Connect negative (-) probe of multimeter to wrecker control panel terminal board position C. (4) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (5) If 24 vdc is not present, repair wire 7 (para 2-45), or replace wrecker control panel wiring harness (para 7-83). (6) Position master power switch to off (TM 9-2320-366-10-1). (7) Install wrecker control panel top cover (para 17-20).