TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 561 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1437 2-1437 2-1437 2-1437 2-1437 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Set multimeter to vdc. (2) Connect positive (+) probe of multimeter to station selector switch rear pin. (3) Connect negative (-) probe of multimeter to wrecker control panel terminal board position C. (4) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (5) If 24 vdc is not present, replace station selector switch (para 7-34). (6) Position master power switch to off (TM 9-2320-366-10-1).